Yamaha XCITY VP250 Owner's Manual page 20

INSTRUMENT AND CONTROL FUNCTIONS
3
ZAUM0393
To reset a tripmeter, select it by push-
ing the "MODE" button, and then push
the "SET" button for at least one sec-
ond. If you do not reset the fuel reserve
tripmeter manually, it will reset itself au-
tomatically and the display will return to
the prior mode after refueling and trav-
eling 5 km (3 mi).
Clock mode
To set the clock:
1. When the display is in the "Total"
mode, push the "SET" button for at
least two seconds.
2. When the hour digits start flashing,
push the "SET" button to set the
hours.
ZAUM0394
3. Push the "MODE" button, and the
minute digits will start flashing.
4. Push the "SET" button to set the
minutes.
5. Push the "MODE" button and then
release it to start the clock. The
display will return to the "Total"
mode.
ZAUM0395
3-5
Ambient temperature display
1
2
3
ZAUM0396
1. Frost warning indicator " "
2. Minus item
3. Temperature
This display shows the ambient tem-
perature from –30 °C (–86 °F) to 50 °C
(122 °F).
The frost warning indicator " " auto-
matically comes on if the temperature is
lower than 3 °C (37.4 °F).