Yamaha XCITY VP250 Owner's Manual page 19

G
a clock
G
an ambient temperature display
G an oil change indicator (which
comes on when the engine oil
should be changed)
NOTE:
G
For the UK, the distance traveled
is displayed in miles and the tem-
perature reading is displayed in °F.
G For other countries, the distance
traveled is displayed in kilometers
and the temperature reading is dis-
played in °C.
Odometer and tripmeter modes
Pushing the "MODE" button switches
the display between the odometer
mode "Total" and the tripmeter modes
"Trip" in the following order:
Total → Trip 1 → Trip 2 → Trip/fuel →
Total
INSTRUMENT AND CONTROL FUNCTIONS
"Mode"
1 2
"Mode"
4 3
"Mode"
ZAUM0391
1. Total
2. Trip 1
3. Trip 2
4. Trip/Fuel
NOTE:
G The Trip/fuel odometer is only acti-
vated if the fuel level warning light
comes on.
G
The Trip 2 odometer is automati-
cally reset after turning the key to
" " and two hours have passed.
Pushing the "SET" button when in the
tripmeter mode switches the display
between the different tripmeter func-
tions in the following order:
Trip 1 or Trip 2 → Time 1 or 2 → Aver-
age speed 1 or 2 → Trip 1 or Trip 2
3-4
"Mode"
ZAUM0392
1. Distance
2. Time
3. Average speed
If the fuel level warning light comes on
(See page 3-3.), the display will auto-
matically change to the fuel reserve
tripmeter mode "Trip/fuel" and start
counting the distance traveled from that
point. In that case, pushing the "MODE"
button switches the display between
the various tripmeter and odometer
modes in the following order:
Trip/Fuel → Trip 1 → Trip 2 → Total →
Trip/fuel
1
"Set"
2
"Set"
"Set"
3
3