Coolant - Yamaha XCITY VP250 Owner's Manual

Hide thumbs Also See for XCITY VP250:
Table of Contents

Advertisement

PERIODIC MAINTENANCE AND MINOR REPAIR
6. Add the specified amount of the
recommended final transmission
oil, and then install and tighten the
oil filler cap.
Recommended final transmission
oil:
See page 8-1.
Oil quantity:
0.25 L (0.26 US qt) (0.22 Imp.qt)
WARNING
G
Make sure that no foreign mate-
rial enters the final transmission
case.
6
G
Make sure that no oil gets on the
tire or wheel.
7. Check the final transmission case
for oil leakage. If oil is leaking,
check for the cause.

Coolant

The coolant level should be checked
before each ride. In addition, the cool-
ant must be changed at the intervals
specified in the periodic maintenance
and lubrication chart.
To check the coolant level
1. Place the vehicle on a level sur-
EWA11310
face and hold it in an upright posi-
tion.
NOTE:
G
The coolant level must be checked
on a cold engine since the level
varies with engine temperature.
G
Make sure that the vehicle is posi-
tioned straight up when checking
the coolant level. A slight tilt to the
side can result in a false reading.
2. Check the coolant level through
the check window.
NOTE:
The coolant should be between the
minimum and maximum level marks.
EAU20070
EAUM2101
ZAUM0660
1. Maximum level mark
2. Minimum level mark
3. If the coolant is at or below the
4. Open the reservoir cap, and then
ZAUM0661
1. Coolant reservoir cap
6-10
1
2
minimum level mark, remove the
cowling A. (See page 6-5.)
add coolant to the maximum level
mark.
1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents