Replacing A Rear Turn Signal Light Bulb; License Plate Light - Yamaha Xenter HW151 Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
Replacing a rear turn signal
light bulb
1. Remove the turn signal lens by
1
removing the screw.
2
1
3
4
5
1. Rear turn signal light bulb
6 2. Remove the burnt-out bulb by
pushing it in and turning it coun-
terclockwise.
7
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
8
wise until it stops.
9
NOTICE
If a turn signal light bulb of differ-
ent wattage than recommended is
used, the turn signal light fl ashing
EAUT3670
may be affected.
4. Install the lens by installing the
screw. NOTICE: Do not over-
tighten the screw, otherwise
the lens may break.
ECAU0080

License plate light

[ECA11191]
1. License plate light
If the license plate light does not come
on, have a Yamaha dealer check the
electrical circuit or replace the bulb.
6-31
EAU1722A
EAU24330
1