Tail/Brake Light - Yamaha TMAX XP500 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
1
2
3
1. Headlight bulb holder
2. Unhook.
4
WARNING
5
Headlight bulbs get very hot. There-
fore, keep flammable products away
6
from a lit headlight bulb, and do not
touch the bulb until it has cooled
7
down.
3. Place a new headlight bulb into po-
8
sition, and then secure it with the
bulb holder.
9
CAUTION:
Do not touch the glass part of the
headlight bulb to keep it free from
oil, otherwise the transparency of
the glass, the luminosity of the bulb,
and the bulb life will be adversely af-
1
fected. Thoroughly clean off any dirt
and fingerprints on the headlight
bulb using a cloth moistened with al-
2
cohol or thinner.
EWA10790
1. Do not touch the glass part of the bulb.
4. Install the headlight bulb cover,
and then connect the coupler.
5. Have a Yamaha dealer adjust the
headlight beam if necessary.
ECA10660
1
6-33

Tail/brake light

If the tail/brake light does not come on,
have a Yamaha dealer check its electri-
cal circuit or replace the bulb.
EAU43040