Adjusting The Rider Backrest; Helmet Holder - Yamaha TMAX XP500 Owner's Manual

Adjusting the rider backrest

The rider backrest can be adjusted to
the three different positions shown.
1
1. Rider backrest
Adjust the backrest as follows.
1. Open the seat. (See page 3-14.)
2. Remove the backrest bolts.
INSTRUMENT AND CONTROL FUNCTIONS
EAU14270
1
1. Rider backrest
2. Bolt
3. Slide the backrest forward or back-
ward to the desired position.
4. Install and securely tighten the
backrest bolts.
5. Close the seat.

Helmet holder

2
1. Helmet holder
The helmet holder is located under the
seat. A helmet holding cable is provid-
ed beside the owner's tool kit to secure
a helmet to the helmet holder.
To secure a helmet to the helmet
holder
3-15
1. Open the seat. (See page 3-14.)
2. Pass the helmet holding cable
through the buckle on the helmet
strap as shown, and then hook the
cable loop over the helmet holder.
3. Securely close the seat.
EAU14340
1
2
3
4
5
6
7
8
9