To close the seat
1. Fold the seat down, and then
push it down to lock it in place.
2. Remove the key from the main
switch if the scooter will be left
unattended.
NOTE:
Make sure that the seat is properly
secured before riding.
INSTRUMENT AND CONTROL FUNCTIONS
1
1. Rider backrest
Adjusting the rider backrest
The rider backrest can be adjusted to
the three different positions shown.
Adjust the backrest as follows.
3-12
1
1. Rider backrest
2. Bolt (×2)
EAU03880
1. Open the seat. (See page 3-11
Rider
backrest,
adjusting
for seat opening and closing pro-
cedures.)
2. Remove the backrest bolts.
3. Slide the backrest forward or
backward to the desired position.
4. Install and securely tighten the
backrest bolts.
5. Close the seat.
3
2