Fast Rewinding The Tape; Using The “Seek” Function With Your Cassette Tape Player - Ford Thunderbird Owner's Manual

How to locate a desired track on the tape
There are four ways to quickly locate a desired
selection on the tape. You can use the fast
forward, rewind, "SEEK" or "SCAN" function.
Following are brief descriptions of each.
Fast forwarding the tape
To fast forward the tape, press the "FF"
button. The radio will automatically begin
playing until fast forward is manually
stopped (by pushing the "PLAY PROG"
button) or the end of the tape is reached.
At the end of the tape, the direction
automatically reverses and plays the other
side of the tape.

Fast rewinding the tape

To rewind the tape, press the "REW" button.
The radio will automatically begin playing
when rewind is manually stopped (by
pushing the "PLAY PROG" button) or the
beginning of the tape is reached.
Using the "SEEK" function with your cassette
tape player
While in the tape mode, push the right a
side of the "SEEK" button to seek forward to
the next selection on the tape. Push the left
b side to seek the beginning of the current
tape selection.
NOTE: If you want to restart a currently
playing tape selection, press the left b
side of the "SEEK" button after
approximately three seconds into the
current selection.
Whirling sprockets in the display l indicate
the direction of tape travel.
52