Table of Contents
Advertisement
High Beams and Flashing the Lamps
To turn on the high beams, turn the headlamp control knob to
the headlamp ON position and push the turn signal lever away
from you until it latches. When the high beams are on, the high
beam indicator light on the instrument cluster comes on.
To turn off the high beams, pull the lever back to the off
position.
To flash the headlamps, pull the lever toward you for a moment
and then release it. The headlamps will flash whether the
headlamp knob is in the on or off position.
Windshield Wipers and Washer
To turn on the windshield wipers, the ignition key must be
turned to the ON position.
Using the windshield wiper
The windshield wipers can be set on high, low speed or interval
wipe. Turn the ring on the lever to set a longer or shorter pause
between wiping cycles.
60
Advertisement
Table of Contents
