Table of Contents
Advertisement
How to eject the tape
To stop the tape and eject the cassette, press the eject (i)
button. The radio will resume playing.
Using the Dolby B noise reduction feature
NOTE: Noise reduction system manufactured under license
from Dolby Labs Licensing Corporation. "Dolby" and
double-D symbol are trademarks of Dolby
Laboratories Licensing Corporation.
Push station memory button 3 to activate Dolby B Noise
Reduction.
Tips on Caring for the Cassette Player and Tapes
In order to keep your cassette tape player performing the way it
was meant to, read and follow these simple precautions:
Using a Ford Cassette Cleaning Cartridge or equivalent to
clean the tape player head after 10-12 hours of play will help
maintain the best playback sound and proper tape operation.
Only cassettes that are 90 minutes long or less should be
used. Tapes longer than 90 minutes are thinner and subject
to breakage or may jam the tape player mechanism.
Protect cassettes from exposure to direct sunlight, high
humidity and extreme heat or cold. If they are exposed to
extreme conditions, allow them to reach a moderate
temperature before playing.
If a tape is loose inside the cassette, tighten it before playing
by putting your finger or a pencil into one of the holes and
turning the hub until the tape is tight.
Loose labels on cassette tapes can become lodged in the
mechanism. Remove any loose label material before inserting
a cassette.
Electronic Sound Systems
43
Advertisement
Table of Contents
