Table of Contents
Advertisement
Normal operating temperature is reached after driving
approximately 20 miles (30 km). The fluid level should be
within the crosshatched area on the dipstick.
NOTE: If the vehicle has been operated for an extended
period at high speeds, driven in city traffic during hot
weather, or has been pulling a trailer, the vehicle
should be turned off for about 30 minutes to allow
the fluid to cool before checking.
Automatic transaxle fluid dipstick
Adding Automatic Transaxle Fluid
Before adding any fluid, be sure that the correct type will be
used. Correct type is shown on the dipstick.
Add fluid in 1/2 pint (.25L) increments through the filler tube
to bring the level to the correct area on the dipstick. DO NOT
OVERFILL. If the level is above the top hole on the dipstick,
excess fluid should be removed by a qualified technician.
Maintenance and Care
193
Advertisement
Table of Contents
