Ford Mystique Owner's Manual page 114

Table of Contents

Advertisement

Carefully follow all of the manufacturer's instructions
included with the safety seat you put in your vehicle. If
you do not install and use the safety seat properly, the
child may be injured in a sudden stop or collision.
Installing Child Safety Seats in the Rear Center Seating
Position
Some child safety seats may be too wide to fit in the rear center
seat. If you wish to install a child safety seat in the rear center
seating position, choose a child safety seat with a base that can
fit between the safety belt buckles. Otherwise, secure the child
safety seat in another seating position.
Attaching Safety Seats With Tether Straps
Some manufacturers make safety seats that include a tether
strap that goes over the back of the vehicle seat and attaches to
an anchoring point. Other manufacturers offer the tether strap
as an accessory. Contact the manufacturer of your child safety
seat for information about ordering a tether strap.
To install a tether from a child safety seat in the front seat,
route the tether strap under the vehicle seat head restraint and
hook the tether hook into the hole in the tongue of the center
rear lap belt. After the hook is in the hole, pull on the loose end
of the lap belt webbing to shorten the belt and tighten the
tether strap.
To install a tethered child safety seat in the rear seat, you will
need tether anchorage hardware.
114
RWARNING

Advertisement

Table of Contents
loading

Table of Contents