Table of Contents
Advertisement
Basic operation
Plugging in a USB storage device
% Plug a USB storage device into the USB
connector.
USB connector
p Compatibility with all USB storage device is
not guaranteed.
This navigation system may not achieve op-
timum performance with some USB sto-
rage devices.
p Connection via USB hub is not possible.
Unplugging a USB storage device
% Pull out the USB storage device after
checking that no data is being accessed.
Connecting and
disconnecting an iPod
CAUTION
! To prevent data loss and damage to the sto-
rage device, never remove it from this naviga-
tion system while data is being transferred.
! If data loss or corruption occurs on the sto-
rage device for any reason, it is usually not
possible to recover the data. Pioneer accepts
no liability for damages, costs or expenses
arising from data loss or corruption.
Connecting your iPod
Using the USB interface cable for iPod en-
ables you to connect your iPod to the naviga-
tion system.
p A USB interface cable for iPod (CD-IU50V)
1
checking that no data is being accessed.
USB storage device
2
Disconnecting your iPod
% Pull out the USB interface cable for iPod
after checking that no data is being ac-
cessed.
Flow from startup to
termination
1
After a short pause, the splash screen comes
on for a few seconds.
(sold separately) is required for connection.
Pull out the USB storage device after
USB connector
p For more details about iPod compatibility
with this navigation system, refer to the in-
formation on our website.
p Connection via USB hub is not possible.
Connect your iPod.
Start the engine to boot up the system.
p To protect the LCD screen from damage, be
sure to touch the touch panel keys with
your finger and gently touch the screen.
Chapter
USB interface cable
for iPod
Engb
02
15
Advertisement
Table of Contents
