Added Functions For Dca Groups - Yamaha CL5 Supplementary Manual

■ Editing and displaying mute group names
Mute group names can be specified in the same way as for DCA groups.
1
1
NAME EDIT button
Edits the group name of the currently selected MUTE group.
The registered group name is shown in the RECALL SAFE MODE popup window, the GLOBAL
RECALL SAFE popup window, and the GLOBAL PASTE window's PATCH/NAME tab.

Added functions for DCA groups

Sends from an input channel to a bus whose send point is set to PRE can now be assigned to be muted
by a DCA group.
1
POST ONLY button
Specifies the object of muting as POST only.
2
PRE & POST button
Specifies the object of muting as PRE and POST.
The PRE&POST indicator is shown below a DCA group that has this setting.
The object of muting for a DCA group can be specified individually for each DCP group.
For channels that are assigned to more than one DCA group, muting any of the DCA groups will mute
that channel's signal path (including sends to the corresponding buses).
8
Grouping and linking
1 2
V1.7 Supplementary Manual