Ending Calls; Redialing Numbers; Muting The Microphone; Adjusting The Volume - Polycom CX700 User Manual

Ending Calls

Redialing Numbers

Muting the Microphone

Adjusting the Volume

To end a call:
Do one of the following steps:
— Press the EndCall soft key.
— Replace the handset.
— Press the Speakerphone key if you are using the speakerphone.
— Press the Headset key if you are using the optional headset.
To redial the last placed call:
1. On the left-hand side of the graphic display, select the Contacts soft key,
.
2. Press the Redial soft key.
To redial any missed call:
Refer to Managing Call Lists
During a call, press the Microphone Mute key. Microphone Mute LED turns
on to indicate that the other party cannot hear you.
Microphone Mute applies to calls using the handset, headset, and
speakerphone. You can still hear all other parties while mute is enabled.
To turn off Microphone Mute, press the Microphone Mute key again.
During a call, if you are using the speakerphone, pressing the Volume key
adjusts the speaker volume.
Using the Basic Features of Your Polycom® CX700 IP Phone
on page 2-10.
3 - 5