Direct Mapping Mode - IOGear KeyMander GE1337P User Manual

Chapter 4. Advanced Control

Direct Mapping Mode

Direct Mapping allows you to change keyboard mappings directly from the
keyboard connected to the KeyMander. This allows you to make mapping
changes without having to use the KeyMander software. For example, you can
change how the spacebar is mapped to the PS3 controller.
To use Direct Mapping:
1. From the PS3 controller connected to the KeyMander, press Select + Start,
at the same time:
2. Press the PS Button:
3. Press any PS3 controller button.
4. Press a key on the keyboard to map the controller button to.
5. Single Beep - Direct Mapping was successful. Double Beep - Direct
Mapping was unsuccessful.
Note: Changes are to Group in use Profiles, so they are not permanently saved.
41