Rear View - IOGear KeyMander GE1337P User Manual

Rear View

No. Component
1 Reset Switch
2 Game Port
3 PC Port
4 KB Power Port
1
This switch resets the KEYMANDER. Press and release
to reset the device.
The Game Port is used to connect the KEYMANDER to
the PS3 game console and is also used to power the unit.
The PC port is used to connect the KEYMANDER to a
computer. This connection is used to configure the
KEYMANDER via the KeyMander software, or to connect a
laptop for game play.
Note: This port does not provide power to the KEYMANDER.
Use a mini USB to USB cable to connect this port to a 5V
power source. This port provides power to the
KEYMANDER when connected to a computer, or additional
power for advanced keyboards connected to the Keyboard
Port.
2
3
Description
Chapter 1. Introduction
4
5