Getting Started; Connecting Hardware - IOGear KeyMander GE1337P User Manual

Getting Started

To begin using the KeyMander with your PS3 follow these three steps:

1. Connecting Hardware

2. Basic Operation
3. Downloading Software
Connecting Hardware
Use the diagram on the next page, and do the following:
1. Connect a PS3 controller to the Controller Port.
2. Connect a USB keyboard to the Keyboard Port.
3. Connect a USB mouse to the Mouse Port.
4. Use the Mini USB to USB cable included with this package to connect the
Game Port to the PS3's controller port #1.
5. Power on the PS3 console. The KEYMANDER is ready for use.
The next steps are to connect the KEYMANDER to a computer to
use the KeyMander software, and/or for advanced keyboards that
require additional power.
6. Use the Mini USB to USB cable included with this package, to connect the
PC Port* to a computer.
7. Use a Mini USB to USB cable (not included) to connect the KB Power
Port to a 5V USB power source.
Note: 1. The Game Port or KB Power Port must also be connected to
provide power to the KEYMANDER.
2. Steps 1~4 are required for gameplay.
3. Steps 6 & 7 are required to use the KeyMander software.
Chapter 2
6