Deli Fresh Drawer (Some Models); Garden Fresh™ Crispers (Some Models); Storage Rack (Some Models) - Amana Side-by-Side Refrigerator Owner's Manual

Hide thumbs Also See for Side-by-Side Refrigerator:
Table of Contents

Advertisement

Available languages

Available languages

• Replace shelf by inserting hooks into metal track and
lowering front. Use slots 8 through 11 only. Replace
drawer by sliding in. Confirm boot is over air inlet in
side wall.
Deli Fresh Drawer
(Some models)
• Remove drawer by lifting and pulling out. Remove
shelf by lifting front, releasing hooks from metal track
then pulling out.
• Replace shelf by inserting hooks into metal track and
lowering front. Replace drawer by sliding in.
Garden Fresh
Crispers
Garden Fresh
crispers keep produce fresh longer.
Wrap produce tightly. Do not wash produce before
placing in crispers. Excess moisture could cause
produce to spoil prematurely. Do not line crispers with
paper towels. Paper towels will retain moisture.
Garden Fresh
control is located below front shelf trim.
Control adjusts humidity in crispers. Slide control to high
for produce with leaves such as lettuce, spinach or
cabbage. Slide control to low for produce with skins such
as cauliflower, corn or tomatoes.
Caution
To avoid personal injury or property damage, handle
tempered glass shelves carefully. Shelves may break
suddenly if nicked, scratched, or exposed to sudden
temperature change.
(Some models)
Remove shelf and garden fresh crispers by completing
the following steps.
1. Open crisper.
2. Remove shelf by gently pushing up from underneath.
Tilt one end up then pull out.
3. Remove crisper by lifting front while supporting
underneath then pulling out.
4. Replace crispers and shelf by reversing steps 1–3.
Storage Rack
(Some models)
Storage rack provides convenient storage for items such
as a large bottle, eggs, etc.
Depending on location of shelf, hang rack using 1 of the
following methods. Rack cannot be installed next to
lower Fresh Food section light bulb.
• Remove shelf by lifting front, releasing hooks from
metal track then pulling out. Hang rack by inserting
tabs into slots on side of shelf. Replace shelf by
inserting hooks into metal track and lowering front.
• Slide rack along side of shelf until tabs are inserted
into slots.
A
A. Storage rack
8

Advertisement

Table of Contents
loading

Table of Contents