Epson EPL-N2050+ Setup Manual page 21

w
Warning:
Avoid touching electrical components that are exposed after you
have removed the printer's casing. They may be very hot if the
printer has been in use.
Follow these steps to install an optional memory module:
1. Make sure the printer is not turned on.
2. Face the left side of the printer.
3. Loosen the two retaining screws on the back of the printer and
remove the left side casing of the printer.
Note:
The two retaining screws are attached to the printer casing to
prevent them from falling off.
Installing the Options
15