Epson EPL-N2050+ Setup Manual page 11

Unless specifically instructed in this guide, do not attempt to
service this product yourself. Opening or removing covers
that are marked Do Not Remove may expose you to high
voltage. Refer all servicing in those compartments to a
qualified service representative.
Unplug the printer and refer servicing to a qualified service
representative under the following conditions:
A. If liquid has been spilled onto the printer.
B. If the printer has been exposed to rain or water.
C. If the printer does not operate normally when the
operating instructions are followed. Adjust only those
controls that are covered by the operating instructions
since improper adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore the product to normal
operation.
D. If the printer has been dropped or the cabinet damaged.
E. If it exhibits a distinct change in performance.
F. When the power cord or plug is damaged or frayed.
If you plan to use the printer in Germany, observe the
following:
To provide adequate short-circuit protection and over-
current protection for this printer, the building installation
must be protected by a 10 or 16 amp circuit breaker.
Note for German-speaking users:
Bei Anschluss des Druckers an die Stromversorgung muss
sichergestellt werden, dass die Gebäudeinstallation mit einer
10 A- oder 16 A-Sicherung abgesichert ist.
Safety Instructions
5