Adding A Call; Bridge Soft Key - Polycom SoundStation2 User Manual/Administrator Manual

Adding a call

1. While on an active call, press the
Conference button
call is automatically placed on
hold.
2. Dial the number you wish to call.
You may use the Redial or Direct
Dial method.
3. Press the Conference button
JOIN
or soft key to join the second
call. To drop the second call,
press the Conf key again.

Bridge Soft Key

You may program the telephone number of
your preferred audio conferencing bridge or
service into the SoundStation2 so that it is
immediately available.
Programming the Bridge number
1. Press the Menu button
choose Bridge Setup using the
Scrolling buttons,
the Select button
2. Choose Enter Phone Number and
press the Select button
then enter the bridge number using
the dial pad. Enter any necessary
prex such as 9 and/or 1.
► If you make a mistake entering the
number, use the
correct the error.
SAVE
3. Press the
if you wish to cancel the
soft key
procedure.
. The rst
,
and press
.
and
< DEL
soft key to
CANCEL

soft key or
SoundStation2 User Guide - 15
OR
HOLD

1. Press the
the rst call on hold.
2. Press the Conference button
and enter the number you wish to
call. You may use the Redial or
Direct Dial method.
The SPEED
DIAL soft key will not
display when the bridge number
is congured.
soft key to place