Adding A Call; Bridge Soft Key - Polycom SoundStation2 User Manual And Administrator Manual

Adding a call

1. While on an active call, press the
Conference button
call is automatically placed on
hold.
2. Dial the number you wish to call.
You may use the Redial or Direct
Dial method.
3. Press the Conference button
or soft key to join the second
JOIN
call. To drop the second call,
press the Conf key again.

Bridge Soft Key

You may program the telephone number of
your preferred audio conferencing bridge or
service into the SoundStation2™ so that it
is immediately available.
Programming the Bridge number
1. Press the Menu button, choose
Bridge Setup using the Scrolling
buttons, and press the Select button.
2. Choose Enter Phone Number and
press the Select button and then en-
ter the bridge number using the dial
pad. Enter any necessary prefix
such as 9 and/or 1.
► If you make a mistake entering the
number, use the
correct the error.
3. Press the
SAVE
if you wish to cancel the
soft key
procedure.
. The first
soft key to
<DEL
soft key or
CANCEL
SoundStation2™ User Guide - 15
OR
1. Press the
HOLD
the first call on hold.
2. Press the Conference button
and enter the number you wish to
call. You may use the Redial or
Direct Dial method.
The SPEED DIAL soft key will not
display when the bridge number
is configured.
��������
����������
����������
������������
������������
������������������
�������������
soft key to place