Removing A Cover; Removing Memory Modules - Fujitsu M2010 Operating Manual

Removing a cover

► Remove the "Torx 6" M2 x 4 mm screws (1).
Keep the screws carefully in a safe place. If you are removing several components at
the same time, keep the screws for the individual components separate from each
other. If you install the wrong screws, components may be damaged.
► Lift the cover off the notebook (2).

Removing memory modules

3
1
A26391-K245-Z220-1-7619, edition 1
Removing and installing components during servicing
2
1
1
2
► Carefully push the two mounting
clips outwards (1).
Memory module Memory expansion
The memory module snaps upwards (2).
► Pull the memory module out of its slot
in the direction of the arrow (3).
39