Connecting The Interface Cable; Serial Interface Cable; Parallel Interface Cable - Star Micronics SP317 Installation Manual

4. CONNECTING THE INTERFACE CABLE

4-1. Serial Interface Cable

Screwdriver
Fig. 4-1 Connecting the serial interface
cable

4-2. Parallel Interface Cable

Fig. 4-2 Connecting the parallel interface
cable
1 Turn off power for both the host
2 Insert the connector of the interface
3 Next, tighten the screws on the con-
Screws
1 Turn off the power for both the host
2 Insert one connector of the interface
3 Insert the other terminal of the inter-
– 6 –
computer and the printer.
cable into the connector on the
printer and the other end of the in-
terface cable into the connector for
the host computer.
nectors.
computer and the printer.
cable into the printer's connector
and fasten it with the clasp, as shown
in Fig. 4-2.
face cable into the host computer's
connector, and fasten it with the
clasp.