Alert Filter Assignments - McAfee M-1250 - Network Security Platform Configuration Manual

McAfee® Network Security Platform 5.1
1
2

Alert filter assignments

To apply alert filters to resources from the Configuration page, select one of the following
nodes from the Resource Tree:
•
•
•
The Manager displays two tabs: Exploit and Reconnaissance.
Figure 90: Edit Alert Filter Assignments
Fields under the Exploit Tab:
The Exploit tab has two sub-tabs: Inbound/Outbound. Both display the same fields but for
incoming and outgoing attacks respectively.
IPS Settings > Alert Filters
Select
Alert Filter List
From , select the alert filter you want to delete and click
Security Platform prompts you to confirm that you want to delete the filters before it
completes the request.
IPS Settings > Alert Filters > Filter Assignments
IPS Settings:
IPS Settings / Sensor_Name/ IPS Sensor > Alert Filters
Sensor:
IPS Settings <sensor name><port name> > Scanning > Alert Filters
Interface/Sub-interface:
.
82
Managing IPS settings
Delete.
Network