Adding Acls On The Interface - McAfee M-1250 - Network Security Platform Configuration Manual

McAfee® Network Security Platform 5.1
2
Figure 227: DoS Detection Status - Rate Data

Adding ACLs on the interface

The
control list rules for traffic passing through a specific Sensor interface.
Figure 228: ACL Assignments Tab
Assigning ACL rules
You can assign ACL at interface level. For more information see Assigning ACL rules in
the IPS Sensor (on page 181).
Note 1:
an interface and if you try to delegate that interface to child domain, an error
message is displayed.
(Optional) Select a Dos ID and click
DoS profile applied to the selected DoS ID. You can change the measure by toggling
Select a Measure
the drop-down list and clicking
Back
Detail" table, click .
ACL
tab contains one action,
If you are allocating an ACL rule (which are not visible to child domains) to
View
to display rate data for the measures in the
View
. To return to the "Applied Policy
ACL Assignments
, which enables you to assign access
233
The IPS Sensor_Name node