Table of Contents
Advertisement
7
EUROGRAND EG8280USB/EG2280USB User Manual
3. Control Elements
and Connections
3.1 Control panel
Fig. 3.1: Control elements of the EG2280USB/EG8280USB
The control elements of the EG2280USB/EG8280USB are described below. To give
you a clear overview of the control panel, its elements have been grouped in
separate sections.
(1)
(2)
(1) VOLUME: is used to adjust the volume of the built-in loudspeakers and
headphone outputs.
(2) COLOR: Varies the sound character from soft (left) to bright (right).
(3) SPEAKERS OFF: Switches the built-in loudspeakers on and off.
The MUTE LED lights up only when the built-in loudspeakers are switched
off. When you insert your headphones this will automatically switch off the
built-in loudspeakers.
(4) DEMO: Enables/disables DEMO mode.
(5)
(6)
(7)
(5) CLICK: Is used to start/stop the metronome click.
(3)
(4)
(8)
(9)
(6) TRACK 1: Selects track 1 for playback or recording. The REC LED lights up
when the track has been activated for recording. The PLAY LED lights up
when the track has been set for playback and already contains musical data.
(7) TRACK 2: Selects track 2 for playback or recording. The REC LED lights up
when the track has been activated for recording. The PLAY LED lights up
when the track has been set for playback and already contains musical data.
Is used to start/stop playback or recording of the music sequencer.
(8)
(9) REC: Activates record mode.
(11)
(10)
(10) MODE: Selects the TEMPO parameter and menu pages for EDIT mode.
The EDIT MODE LED shows in EDIT mode, the TEMPO LED in TEMPO mode.
(11) Down/Up: Depending on which mode you have selected with the MODE
button, these two buttons can be used to enter the tempo or to scroll
through the EDIT mode menu pages.
(12) Display: Depending on the function used, the display reads the tempo,
menu numbers or parameter values.
(13) -/NO, +/YES: Is used to raise/lower the parameter values shown in the
display. Additionally, the +/YES button executes certain EDIT functions.
(14) TONE: These 14 buttons are used for sound selection. In DEMO mode they
are used to select individual sound color demos.
(15)
(16)
(17)
REVERB: Selects one of four room effects (CHAMBER, CONCERT, CHURCH,
(15)
THEATER) for the selected sound. An LED shows which effect is currently
active. If no LED lights up, no room effect is active.
(13)
(12)
(14)
(18)
Advertisement
Table of Contents
