Controls And Connections - Behringer iAXE393 User Manual

iAXE393 USB-GUITAR
The iAXE393 can either be connected directly via jack to an amplifier or by connecting the provided USB cable to your PC/Mac
computer. At the same time, the USB connection acts as power supply for the iAXE393 guitar.
You can use a commercially available ¼" TRS for the
connection.
You can connect the guitar with the USB connection to
your computer via USB. The blue control LED indicates that
a connection to the computer has been established.
The ¼" TS connection can be used to connect the iAXE393
guitar to any standard guitar amplifier. (See Fig. 4.2)
With the TONE controllers, you can lower the high
frequencies of the guitar.
These controllers affect both conventional and USB
output.
6

2 CONTROLS AND CONNECTIONS

Fig. 2.1: Control elements and connections
-
2 CONTROLS AND CONNECTIONS
The VOLUME controller lets you change the volume of the
guitar output. The headphone volume needs to be changed
by using the software on the computer.
We would like to draw your attention to the fact that
extremely loud sound levels may damage your
hearing as well as your headphones/loudspeakers.
Turn the VOLUME control fully to the left before you
switch on the unit. Be careful to select a suitable
volume at all times.
This controller affects both conventional and USB
output.