Setting The Volume Of Muted Tracks; Editing The Music Sequencer Settings - Behringer EUROGRAND EG2280USB User Manual

16
EUROGRAND EG8280USB/EG2280USB User Manual
5) To stop the playback, press the
5.5.4 Repeating musical passages for practicing
The following section describes how to play back a specific passage of a recorded
music piece repeatedly. This function is ideal for practicing a specific difficult
passage recorded by your piano teacher.
◊
To make the best use of this function, the left and righthand parts
should be recorded separately on tracks 1 and 2. In this case, you can
play back one part only with the music sequencer, while you practice
the other part.
1) Select the track to be played back, so that the PLAY LED above the
corresponding TRACK button lights up.
◊
The volume of a muted track is adjustable (see chapter 5.5.5).
2) Press the button to play back the selected track.
3) Press the MODE button in the TEMPO/EDIT MODE section when the playback
has reached the point from which you want to start repeating a passage.
The display reads:
A-: Starting point of the loop is set.
button 4) Press the MODE button again when the playback reaches the point where
you want to end the repetition of a passage.
The display reads:
A-b: Ending point of the loop is set.
The musical passage is now repeated continuously, so that you can practice it
to perfection.
5) When you want to stop practicing, press the
the playback.
◊
Press the MODE button again to quit repetition mode.
◊
The passage marked as a loop for repetition is automatically erased
when you quit music sequencer mode.

5.5.5 Setting the volume of muted tracks

1) This function allows you to set the volume of muted tracks.
◊
Please enter EDIT mode (see chapter 5.1) and select the following function.
Function: E6
Value:
0 . . . 20
Description:
Volume of muted track
1 . . . 20:
Muted tracks are not audible
0:

5.5.6 Editing the music sequencer settings

The following paragraphs explain how to edit the playback settings of recordings
made with the music sequencer.
The following settings can be edited separately for each of the two tracks:
• Sound (see chapter 2.4)
• Room effect intensity (see chapter 4.2.2)
• Modulation effect intensity (see chapter 4.2.3)
• Layered sounds (see chapters 4.1 and 5.3)
The following global settings can be made for the whole music piece:
• Tempo (see chapter 5.4)
• Meter (see chapter 5.4)
• Type of room effect (see chapter 4.2.2)
• Type of modulation effect (see chapter 4.2.3)
button again to stop