Advanced - Foxconn Quantumian1 User Manual

Advanced

Main Advanced Quantum BIOS Boot Security Save & Exit
Advanced
Legacy OpROM Support
Launch PXE OpROM
Launch Storage OpROM
80h Debug Code Send to
▶ Onboard Device Configuration
▶ Chipset Configuration
▶ ACPI Settings
▶ SATA Configuration
▶ USB Configuration
▶ Hardware Monitor
Legacy OpROM Support
► Launch PXE OpROM
This item is used to enable or disable boot option for legacy network devices.
► Launch Storage OpROM
This item is used to enable or disable boot option for legacy mass storage devices with option
ROM.
► 80h Debug Code Send to
The legacy I/O 80h debug port message will send to LPC bus or PCI bus as your selection.
► Onboard Device Configuration/Chipset Configuration/ACPI Settings/SATA
Configuration/USB Configuration/Hardware Monitor
Press [Enter] to go to the submenu.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
[Disabled]
[Enabled]
[LPC Bus]
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Enabled/Disabled Boot Option
for legacy Network Devices.
→ ← : Select Screen
↑ ↓ : Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
26