Epson EMP-715 User Manual page 30

Setting Effects
Effects, such as pointing to a projected image with a stamp or bar, cannot be performed while a
scenario is being projected only by pressing the [1] through [4] buttons on the remote control.
However, if the effects for the desired screen image are set while creating the scenario, the effects
are available during scenario projection.
1
Right-click the cell for which you want to set effects, and then select [Effect].
2
The "Effect" dialog box is displayed. The same settings are available by selecting
[Effect] in the menu for the projector's main unit. Specify the desired settings while
referring to the following table, and then click the [OK] button.
28
- Creating Scenarios (EMP SlideMaker)