How To Insert The Memory Card - Epson EMP-715 User Manual

2
Press down the eject button again.
The memory card pops out. Pull the memory card straight out.
3
If the eject button is still out, press it in again.
Since the eject button can easily break if it is left out, be sure to push it back in to prevent
damage to the button.
♦

How to Insert the Memory Card

Point
•
If the memory card is inserted backwards, it cannot be fully inserted. Do not attempt to insert
it forcibly.
•
The operation indicator of the projector's card slot shows the current status as follows.
Off: The memory card is not being accessed or one has not been inserted.
Lit in orange: Accessing (Do not remove the memory card.)
Lit in red: A memory card that cannot be used has been inserted.
•
The projector can recognize memory cards in FAT12/16 format.
•
Depending on the SmartMedia used, it may malfunction if an attempt is made to write data to
it while the SmartMedia is write-protected. Do not write-protect SmartMedia.
12
- Removing and Inserting the Memory Card