Recording Audio Only; Recording Features; Recording Pause - GE VG4252 User Manual

Recording a Program

Recording Audio Only

You can record audio only from another audio source connected to the AUDIO IN (L and R) jacks
on the back of the VCR.
To Record Audio Only
1. Press the INPUT button until the line indicator
2. Use SPEED on the remote to select the recording
3. Make sure the Reception: STEREO/MONO/SAP
4. Start audio source playing and press RECORD to
5. Press STOP when you are finished.
To Play Back Audio Only
Connect the AUDIO OUT of the VCR to the appropriate
input on your amplifier or receiver. Do not use the
phono input. Refer to your amplifier or receiver user's
guide for information.

Recording Features

Recording Pause

To prevent recording short passages of unwanted material, use PAUSE during
recording to stop and start recording. The VCR automatically switches from pause
to stop after a few minutes.
24
(VIDEO) appears on the TV screen.
The VCR will record audio from the audio
equipment connected to the AUDIO IN jacks.
speed.
The tape speed indicator appears in the VCR's
display panel and on the TV screen.
feature is set to STEREO.
A. Press MENU to display the VCR MAIN MENU on
the TV screen.
B. Press 5 to display the AUDIO menu.
C. Press 1 to select Reception: STEREO.
D
begin recording.
REC and appear in the VCR's display panel.
VCR MAIN MENU
1 Timer Recordings
2 Set Clock
3 Channels
4 Preferences
5 Audio
6 Language
0 Exit
AUDIO
1 Reception: STEREO
2 Tape Playback: HI-FI
0 Exit