Recording Broadcast Stereo Tv And Sap; Recording Audio Only - GE VG4240 User Manual

Recording Broadcast Stereo TV or SAP
(Second Audio Program)
Some TV programs are broadcast with stereo audio or SAP
(Second Audio Program).
1. Turn on the TV and tune it to the VCR viewing channel
(either 3, 4, or TV's video input).
2. Insert a tape with safety tab in place.
3. If your VCR viewing channel is 3 or 4, make sure the VCR
indicator appears in the VCR's display panel. If not, press
TV.VCR to turn it on.
4. Use the SPEED button on the remote to select a recording
speed. The tape speed indicator appears on the TV screen.
5. Select the channel or line input to be recorded.
6. Set the Reception: STEREO/MONO/SAP feature for the type
of audio you want to record. See Other Features section.
AUDIO
1 Reception: STEREO
2 Tape Playback: HI-FI
0 Exit
7. Press RECORD to start recording.
8. Press STOP when you are finished.
Recording Audio Only
You can record Audio Only from another audio source
connected to the AUDIO IN (R and L/MONO) jacks on the back of
the VCR.
1. Press the INPUT button on the remote to select line input.
The VCR records audio from the audio equipment connected
to the AUDIO IN jacks.
2. Use SPEED on the remote to select the recording speed.
3. Start audio source playing and press RECORD to begin
recording.
4. Press STOP on the remote (STOP.EJECT on VCR) when you
are finished.
I Recording Audio 1
Any video on the tape is erased when
you record audio only.
Audio Connection
VCR
AMPLIFIER / RECEIVER
23