One Touch Recording - GE VG4252 User Manual

Recording a Program

One Touch Recording

One touch recording lets you record up to four hours without using the timer
program feature. The VCR will turn off automatically at the end of the recording.
POWER EJECT
1. Turn on the VCR.
2. Insert a tape with safety tab in place.
3. Select the channel you want to record.
4. Select the desired recording speed using SPEED on the
5. Press RECORD to activate recording.
6. Press RECORD repeatedly until the amount of recording
Stopping a Recording in Progress
You can stop a recording by:
• Pressing and holding the STOP button on the remote or
• Pressing the RECORD button until 0:00 is displayed for the
22
CHANNEL
CHANNEL
TRACKING
TRACKING
Display showing 40 minutes
remaining for recording.
remote.
time for the program is displayed in the VCR's display
panel or on the TV screen.
Rec Ch 04
Record Length 0:00
Press REC to set length
Display on TV Screen
Each press increases the time — 30 minutes up to 4 hours.
The amount of time the VCR will record and the
indicators appear in the VCR's display panel.
TIMER
STOP•EJECT on the VCR for approximately three seconds.
recording.
TV • VCR
INPUT
V C R
S L P
T I M E R R E C
Press Recording
RECORD Time
(
0:30 30 Min)
1:00 (1 Hr)
1:30 (1 Hr, 30 Min)
2:00 (2 Hrs)
3:00 (3 Hrs)
4:00 (4 Hrs)
0:00 (Recording Turns Off)
D
and
REW PLAY FWD
RECORD STOP PAUSE
RECORD