Brother P-Touch QL-500 Operation Manual page 35

16
Select the drive where you install the
driver, and click [Install].
The screen in which the name and password of
administrator is displayed.
17
Input "Name" and "Password" of
administrator and click [OK].
The screen to check the installation is displayed.
18
When continuing the installation, click
[Continue Installation].
The installation starts.
19
When the installation is completed and
the message "The software was
successfully installed" is displayed, click
[Restart].
®
Macintosh is rebooted.
The installation of printer driver is completed.
20
After rebooting, connect the USB
cable to the printer.
As the caution label is put on the USB
port of the printer, remove it and then
connect the USB cable.
21
Connect the USB cable to the USB port of Macintosh
Press ON/OFF button ( ) of the printer to turn on the power.
When connecting the printer to Macintosh
connected correctly. At that time, connect the printer directly to the USB port of
®
Macintosh .
USB port
USB cable
®
®
via USB hub, it may not be
STEP
STEP
STEP
Power cord
STEP
.
35
1
2
3
4