Brother P-Touch QL-500 Operation Manual page 11

Cutter
Follow the followings to avoid personal injury and damage of the printer.
Do not touch the blade of the cutter unit.
Do not open the top cover when
operating the cutter unit.
Installation/Storage
Follow the followings to avoid personal injury and damage of the printer.
When using the printer, do not place it
on a unstable environment, such as
dilapidated table or top of the shelf.
DK Roll (DK Label, DK Tape)
Follow the followings to avoid damage of the printer.
Be careful not to drop the DK Roll.
DK Roll uses thermal paper and thermal
film so that the color of the label will fade
by sunlight or heat. Do not use DK Roll
when you use them for outdoor and
other circumstances which requires their
durability.
Caution
Do not apply excessive pressure to the
cutter unit.
Do not place any heavy objects on top of
the printer.
Depending on the location, material, and
environmental conditions, the label may
have the difficulties to peel or unpeel, or
the color of the label will be changed or
transferred to other objects.
In prior to adhere the label, check the
environmental condition and the
material, and then test the label by
affixing a small piece of it to an
inconspicuous area of the intended
surface.
11
STEP
1
STEP
2
STEP
3
STEP
4