Setting The Dk Roll; Applicable Dk Rolls - Brother P-Touch QL-500 Operation Manual

3 Setting the DK Roll

Applicable DK Rolls

The usable types of DK Roll for the printer are shown below.
DK Roll
General name for
DK Label and DK
Tape.
•
DK Roll, DK Tape and DK Label are available. For the list of applicable DK Rolls,
refer to "List of consumable items" shown in
Manual)".
•
Be sure to use only genuine DK Roll for the printer.
Setting the DK Roll
1
Check that the power is turned OFF (check
LED lamp).
Lift both the both sides of lower part of DK Roll
cover on the front side of the printer to open
the cover.
2
Pull up the roll release lever and
remove the protection sheet of
printing unit.
3
Insert the spool of the DK Roll
along the spool guide of the
printer.
Check the both sides of spool of DK
Roll are correctly inserted into
spool guide of the printer.
This is a pre-cut label roll.
DK Label
Thermal recording paper and thermal recording film are
available.
This is a freely cuttable full-page adhesive tape.
DK Tape
Thermal recording paper and thermal recording film are
available.
"Software User's Guide (PDF
Roll release lever
Printing unit protection sheet
Spool
Spool guide
21
STEP
1
STEP
2
STEP
3
STEP
4