Advanced Chipset Features - Foxconn G43MX Series User Manual

Advanced Chipset features

CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Advanced Chipset Settings
WARNING: Setting wrong values in below sections
► North Bridge Configuration
► South Bridge Configuration
↑↓←→:Move Enter:Select
► North Bridge Configuraion / South Bridge Configuration
Press <Enter> to go to its submenu.
North Bridge Configuration
North Bridge Chipset Configuration
► Video Function Configure
Memory Remap Feature
PCI MMIO Allocation: 4GB To 3584MB
Memory Speed Adjust
Memory Timing by SPD
IGD Graphics Mode Select
IGD GTT Graphic Memory Size [No VT mode, 2MB]
PEG Port
↑↓←→:Move Enter:Select
► Video Function Configure
Press <Enter> to go to its submenu.
► Memory Remap Feature
This item is used to enable/disable memory remapping around memory hole.
PCI doesn't actually care much which addresses are used, but by convention the PC platform
puts them at the top of the 32-bit address space. For many years it wasn't possible or practical
to put that much RAM into a PC. But now it is, so it's up to the memory controller and host
bridge to figure out what to do. Many systems cause that high RAM to simply be ignored,
resulting in the loss of effective RAM. More complex systems will take the RAM that would
Advanced Chipset Features
may cause system to malfunction.
[Press Enter]
[Press Enter]
[Press Enter]
+/-/:Value F10:Save ESC:Exit
F9:Optimized Defaults
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
North Bridge Configuration
[Press Enter]
[Enabled]
[Auto]
[Enabled]
[Enabled, 64MB]
[Auto]
+/-/:Value F10:Save ESC:Exit
Configure North Bridge
features.
F9:Optimized Defaults
29
Help Item
F1:General Help
Help Item
F1:General Help