SuperIO Configuration
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
SuperIO Configuration
EuP Function
OnBoard Floppy Controller
Serial Port1 Address
Serial Port1 Mode
Serial Port2 Address
Serial Port2 Mode
Parallel Port Address
Parallel Port Mode
Parallel Port IRQ
↑↓←→:Move Enter:Select
► EuP Function
This item is used to enable/disable the EuP(Energy-using Products) feature. When enable, the
suspend power of the chipset will be cut off in S5 suspend mode in order to reduce the power
consumption of motherboard.
Enable: S1/S3/S4 is normal, S5 wake up only by pressing the power button.
Disable: Normal ACPI function.
► OnBoard Floppy Controller
This item is used to enable/disable Floppy Controller.
► Serial Port1 Address
This item is used to assign the I/O address and interrupt request (IRQ) for the onboard serial
port 1.
► Serial Port1 Mode
This item enables you to determine the transfer mode of the serial port 1.
► Serial Port2 Address
This item is used to assign the I/O address and interrupt request (IRQ) for the onboard serial
port 2.
► Serial Port2 Mode
This item enables you to determine the transfer mode of the serial port 2.
►Parallel Port Address
This item is used to assign the I/O address and interrupt request (IRQ) for the onboard parallel
port.
►Parallel Port Mode
This item is used to set paraller port mode.
► Parallel Port IRQ
This item is used to assign the interrupt request (IRQ) for the onboard parallel port .
SuperIO Configuration
[Enabled]
S1/S3/S4 is normal,
[Enabled]
S5 wake up only by press-
[3F8/IRQ4]
ing the power button.
[Normal]
[2F8/IRQ3]
[Normal]
[378]
[Normal]
[IRQ7]
+/-/:Value F10:Save ESC:Exit
F9:Optimized Defaults
35
Help Item
F1:General Help