Hard Disks - Foxconn A88GM Deluxe User Manual

Create RAID 0 (Striped)
Here, we will show you how to create two RAID 0 Logical Drives (LD) by using two

hard disks.

1. Select [2] from the main menu, " LD View Menu" appears.
Option ROM Utility (c) 2008 Advanced Micro Devices, Inc.
[↑] Up
[Enter] View LD
2. Press [Crtl-C], the screen appears as below, select RAID 0.
3. Use [↓] key to select the hard disks, press [Space] key to change its assignment
status to "Y". Press [Ctrl-Y] to save the setting. And a message prompts. You can
select any of the two options. Here we select the latter option as an example.
Option ROM Utility (c) 2008 Advanced Micro Devices, Inc.
LD No LD Name
LD 1
Stripe Block:
Gigabyte Boundary:
Port :ID Drive Model
[↑] Up
[Ctrl+Y] Save
[ LD View Menu ]
[ Define LD Menu ]
< There is no any LD exist >
[ Keys Available ]
[↓] Down [PaUp/PaDn] Switch Page
[Ctrl+V] View Single Disk
[ Define LD Menu ]
[ Define LD Menu ]
Logical Drive 1
64 KB
ON
[ Drives Assignment ]
Please press Ctrl-Y key to input the LD name
1 :Mas HDS728090PLA380
or press any key to exit.
2 :Mas WDC WD1200JD-98HBB0 SATA 1.5G
If you do not input any LD name,the default
3 :Mas Hitachi HDT725025VLA3
LD name will be used.
4 :Mas ST3320620AS
[ Keys Available ]
[↓] Down [PaUp/PaDn] Switch Page
[ESC] Exit
[Ctrl+C] Define LD
[ESC] Exit
RAID Mode Drv
RAID 0 2
Fast Init:
Cache Mode:
Compatibilities Capacity(GB)
SATA 3G 82.34
120.03
SATA 3G 250.05
SATA 1.5G 320.07
[Space] Change Option
80
ON
WriteThru
Assignment
Y
Y
N
N