Install Sata Hard Disks; Raid Configuration - Foxconn A88GMV Series User Manual

4-2 Install SATA Hard Disks

1. Shut down your computer.
2. Install SATA hard disks into the drive bays.
3. Connect all the SATA power and SATA data cables.

4-3 RAID Configuration

This motherboard supports RAID 0, RAID 1 and RAID10 functions.
Hardware and software you may need here :
■ A floppy drive
■ A floppy disk(Or USB disk for Vista) ■ A motherboard driver CD
■ Several SATA hard disks
RAID enable in bIoS
1. Boot up your computer, enter the BIOS setup by pressing [Del] key during POST.
2. Set the "OnChip SATA Type" to "RAID".
3. Press [F10] to save the setting, then PC will reboot itself.
option RoM Utility
When PC is rebooting, press [Ctrl-F] key during POST to enter the main menu of the Option ROM
Utility.
Option ROM Utility (c) 2008 Advanced Micro Devices, Inc.
Press 1..4 to Select Option
View Drive Assignment: To view the disk drive assignment status by pressing [1].
Define LD: To Create RAID by pressing [2].
Delete lD: To Delete RAID by pressing [3].
Controller Configuration: To view the SATA controller configuration by pressing [4].
exit: Press [Esc] to exit AMD Option ROM Utility.
■ A DVD-ROM drive
■ Windows XP or Vista Install CD
[ Main Menu ]
View Drive Assignment. . . . . . . [ 1 ]
Define LD . . . . . . . . . . . . . . . . . [ 2 ]
Delete LD . . . . . . . . . . . . . . . . . [ 3 ]
Controller Configuration . . . . . . [ 4 ]
[ Keys Available ]
47
[ESC] Exit