Usb Configuration - Foxconn A88GM Deluxe User Manual

USB Configuration

USB Configuration
Module Version - 2.24.5-13.4
USB Devices Enabled :
Legacy USB Support
USB Keyboard Legacy Support
USB Mouse Legacy Support
USB 2.0 Controller Mode
BIOS EHCI Hand-Off
↑↓←→:Move Enter:Select
► Legacy USB Support
This item is used to enable the support for USB devices on legacy OS. If you have a USB
keyboard or mouse, set to auto or enabled.
► USB Keyboard Legacy Support
This item is used to enable Legacy Support for USB Keyboard.
► USB Mouse Legacy Support
This item is used to enable Legacy Support for USB Mouse.
► USB 2.0 Controller Mode
This item is used to set the transmission rate mode of USB 2.0. The available settings are :
[High Speed] in 480Mbps; [Full Speed] in 12Mbps.
►BIOS EHCI Hand-Off
This is a workround for OSes without EHCI hand-off support.The EHCI ownership
change should claim by EHCI driver.
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
None
+/-/:Value
USB Configuration
Enable support for
legacy USB.
Auto option disables
legacy support if
no USB devices are
[Enabled] connected.
[Enabled]
[Enabled]
[Enabled]
[High Speed]
[Enabled]
F10:Save ESC:Exit
F9:Optimized Defaults
37
Help Item
F1:General Help