Table of Contents
Advertisement
bIoS Security features
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
Scurity Settings
Supervisor Password
User Password
Change Supervisor Password
↑↓←→:Move Enter:Select
► Change Supervisor Password
This item is used to install or change supervisor password.
After you input Supervisor password, it then will ask you to input
user password optionally.
load optimal Defaults
Optimal defaults are the best settings of this motherboard. Always load
the Optimal defaults after updating the BIOS or after clearing the CMOS
values.
Select this option and press Enter, it will pop out a dialogue box to let
you load the defaults. Select <OK> and then press <Enter> to load the
defaults. Select <Cancel> and press <Enter>, it will not load.
By this default, BIOS have set the optimal performance parameters of system to improve the
performances of system components. But if the optimal performance parameters to be set cannot
be supported by your hardware devices (for example, too many expansion cards were installed),
the system might fail to work.
Save Changes and Exit
When you select this option and press <Enter>, a message
will be displayed in the center of the screen:
Select [OK] to save your changes to CMOS and exit the pro-
gram, select [Cancel] or <ESC> to return to the main menu.
Discard Changes and Exit
If you select this option and press <Enter>, the following message
will be displayed in the center of the screen:
Select [OK] to exit CMOS without saving your modifications,
select [Cancel] or <ESC> to return to the main menu.
BIOS Security Features
: Not Installed
: Not Installed
[Press Enter]
[Press Enter]
+/-/:Value
F10:Save
F9:Optimized Defaults
44
Help Item
Enter or change the
password.
ESC:Exit
F1:General Help
Enter New Password :
Load Optimal Defaults?
[OK]
[OK]
Save configuration changes and exit setup?
[OK]
[OK]
Discard changes and exit setup?
[OK]
[OK]
[Cancel]
[Cancel]
[Cancel]
Hide quick links:
Advertisement
Table of Contents
