5-2 RAID enable in bIoS
1. Enter the BIOS setup by pressing <DEL> key when boot up.
2. Select the "Integrated Peripherals" from the "Main menu", then select the
Configuration" menu and press <Enter> to go to the configuration items.
3. Enable RAID function and individual SATA port for hard drive or DVD connection.
4. Press <F10> to save the setting then PC will reboot itself.
IDE Configuration
OnBoard PCI IDE Controller
OnChip SATA Channel
OnChip SATA Type
↑↓←→:Move Enter:Select
5-3 Select a RAID Array for Use
When BIOS is restarted, it will display a message asking you to press [Ctrl-F] key to
enter the main menu of FastBuild BIOS. Press [Ctrl-F], the Main Menu appears.
FastBuild (tm) Utility (c) 2008 Advanced Micro Devices, Inc.
Press 1..4 to Select Option
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
+/-/:Value
View Drive Assignment. . . . . . . [ 1 ]
Define LD . . . . . . . . . . . . . . . . . [ 2 ]
Delete LD . . . . . . . . . . . . . . . . . [ 3 ]
Controller Configuration . . . . . . [ 4 ]
IDE Configuration
[Enabled]
Disabled: Disable the
[Enabled]
I IDE controller.
[RAID]
[RAID]
Enabled: Enable the
IDE controller.
F10:Save
ESC:Exit
F9:Optimized Defaults
[ Main Menu ]
[ Keys Available ]
80
"IDE
Help Item
F1:General Help
[ESC] Exit