Bios Security Features - Foxconn A7DA-S User Manual

bIoS Security features

CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
Scurity Settings
Supervisor Password
User Password
Change Supervisor Password
User Access Level
Change User Password
Clear User Password
Password Check
↑↓←→:Move Enter:Select
► Change Supervisor Password
This item is used to install or change supervisor password.
After you input Supervisor password, it then will ask you to
input user password optionally.
► User Access Level
This item is used to set user access level.
The available settings are:
[No Access]: Prevent user access to the setup utility.
[View Only]: Allow access to the setup utility but the fields can not be changed.
[Limited]: Allow only limited fields to be changed, such as date and time.
[Full Access]: Allow any field to be changed except the supervisor password.
► Change User Password
This item is used to install or change user password.
► Clear User Password
This item will be displayed only when a User Password was set before. It is used to clear the
user password.
► Password Check
When it is set to [Setup], a password is required to enter the BIOS setup; select [Always], a
password is required not only to enter BIOS setup, but also on each boot of your PC.
BIOS Security Features
: Installed
: Installed
[Press Enter]
[Press Enter]
[Full Access]
[Press Enter]
[Press Enter]
[Setup]
+/-/:Value F10:Save
F9:Optimized Defaults
45
Help Item
Install or change the
password.
ESC:Exit F1:General Help
Enter New Password :