Memory Configuration; Dram Timing Configuration - Foxconn 45CSX User Manual

Memory Configuration

Memory Configuration
DRAM Frequency
↑↓←→:Move Enter:Select
► DRAM Frequency
This item is used to set DRAM frequency. Setting values are: [Auto], [400 MHz], [533 MHz].

DRAM Timing Configuration

DRAM Timing Configuration
Configure DRAM Timing by SPD
↑↓←→:Move Enter:Select
► Configure DRAM Timing by SPD
This item is used to enable/disable provision of DRAM timing by SPD device. The Serial
Presence Detect (SPD) device is a small EEPROM chip, mounted on a DDR2 memory
module. It contains important information about the module's speed, size, addressing mode
and various other parameters, so that the motherboard memory controller (chipset) can better
access the memory device.
Select [Enabled] for SPD enable mode.
Select [Disabled] to set the parameters by yourself.
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
Memory Configuration
+/-/:Value
F9:Optimized Defaults
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
DRAM Timing Configuration
+/-/:Value
F9:Optimized Defaults
[Auto] [Auto]
Auto
400 MHz
533 MHz
F10:Save ESC:Exit
[Enabled] [Enabled]
Disabled
Enabled
F10:Save ESC:Exit
24
Help Item
Options
F1:General Help
Help Item
Options
F1:General Help