Install Other Internal Connectors - Foxconn 45CSX User Manual

2-2 Install other Internal Connectors

Power Connectors
This motherboard uses an ATX power supply. In order not to damage any device, make sure all the
devices have been installed properly before applying the power supply.
24-pin ATX power connector : PWR1
PWR1 is the ATX power supply connector. Make sure that the power supply cable and pins are
properly aligned with the connector on the motherboard. Firmly plug the power supply cable into the
connector and make sure it is secure.
24
12
PWR1
!
We recommend you using a 24-pin power supply. If you are using a 20-pin power
supply, you need to align the ATX power connector according to the picture.
Pin #
1
2
3
4
5
6
7
8
9 +5V SB(Stand by +5V)
10
13
11
12
1
20-Pin Power
9
Definition Pin #
3.3V 13
3.3V 14
GND 15
+5V 16
GND 17
+5V 18
GND 19
Power Good 20
21
+12V 22
+12V 23
3.3V 24
Pin No. 24
Definition
3.3V
-12V
GND
PS_ON(Soft On/Off)
GND
GND
GND
NC
+5V
+5V
+5V
GND