Foxconn 520A User Manual page 34

when "Delay 4 sec", the power will be off after the power button is pressed for
more than 4 seconds.
6.4 PWRON After PWR-Fail
This item is used to set what action the PC will take with the power supply
when it resumes after a sudden power failure. The available options are: Off
(remain in turn off status), On (auto power on) and Former-Sts (resume with
the previ-ous status).
6.5 Resume by PCI card
This item is used to set the Resume by PCI card.
6.6 USB Resume from S3
This item is used to enable or disable USB Resume from S3 function.
6.7 USB CSC Resume from S3
W hen enabled, the computer will wake from S3 if a connection status change
is detected i.e. plugging or unplugging a USB device.
6.8 Resume by Alarm
This item is used to set the timing of the start-up function. In order to use this
function, the start-up password function must be canceled. Also, the PC power
source must not be turned off.
6.9 Date of Month Alarm
W hen the Resume by Alarm set as "Enabled", this item will be modified. It is
used to set the timing for the start-up date.
6.10 Time (hh:mm:ss) Alarm
W hen the Resume by Alarm set as "Enabled", this item will be modified. It is
used to set the timing for the start-up time.
6.11 HPET Support
This item allows you to enable or disable High Precision Event Timer
function. If you use windows vista processing system, we intensively sug-
gest that you set this option to "Enabled".
6.12 Power On By Button
W hen "Enabled", you can press the button to turn on the system.
6.13 Power On By Mouse
This item is used to enable or disable to turn on the system by mouse.
6.14 Power On By Keyboard
Allows you to turn on the system by keyboard.
6.15 KB Power ON Password
W hen "Power On By Keyboard" set to "Password", you can enter password to
turn on the system when KB power is using.
6.16 Hot Key Power ON
When "Power On By Keyboard" set to "Hot key", you can use the item to set the
hot key combination to turn on the system.
Chapter 2 BIOS Description
29